• MPPT Wind Turbine Controller
  • MPPT Wind Turbine Controller

MPPT Wind Turbine Controller

Application: Lighting Controller, Wind Controller
Rated Voltage: 12V
Model: Wws(200W,-600W)
Transport Package: Carton Box
Specification: CE
Trademark: Windwing
Samples:
US$ 170/Piece 1 Piece(Min.Order)
| Request Sample
Customization:
Gold Member Since 2012

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
WWS(200W. -600W)
Origin
China
HS Code
85030030
Production Capacity
1000/Month

Product Description

1-1 Basic information
Super-intelligent wind/solar hybrid controller is a new type of special high performance control device for new energy application which is designed on the basis of ultra high performance controller. It contains many years of application experience (such as waterproof, dustproof, salt spray, wiring error, wind resistance limit control of Wind turbines, energy management etc.), it has done to ultimate no matter it applied to the charging control or street light control. In order to meet variety of applications, the controller adopts a hierarchical and modular structure, all functions can be achieved with different functional plates according to actual application, and it is convenient for rapid customization and application.
 
1-2 Characteristics
  1. Waterproof
  Three defenses for circuit board, hierarchical design, even if small amount water enters, it will not damage the device
  1. RS232 communication
Standard configuration RS232 communication, it is easy to do the monitoring with the computer software. (RS485, short-range wireless is optional). Using a USB to RS232 members, more convenient to exchange data with a computer (computer with USB interface can be used).
  1. Safety wire connecting
Terminals are treated with injection molding process, wiring short circuit and cross will not occur, more safety for customers' operating.
  1. Automatically alarming of battery reverse
Battery input terminal will not be damaged with continuous reverse, and it has buzzer alarm. Avoid equipment damage and fire caused by wiring errors, and better protect the battery.
  1. Automatically alarming of Photovoltaic panels reverse
Photovoltaic panels will not be damaged with continuous reverse, and it has buzzer alarm. It will not cause wiring errors especially when work at night. (Note: reverse connection detection in the night needs manually keys intervention)
  1. Continuous short-circuit output protection
Discharge output terminal has continuous short-circuit protection, and over current protection. It is recovered after the abnormal excluded. Avoid damage of the controller or fire caused by electrical equipment fault (especially the short circuit).
  1. Patented Wind turbines steady speed generation control technology
Patented Wind turbines steady speed generation control method, which makes the Wind turbines not run with super speed, the Wind turbines can keep generation with a limited set speed even in the high winds, avoid direct stop of Wind turbines with over speed caused by strong wind. Greatly improve the Wind turbines generation energy and keep the safe running of the Wind turbines.
  1. Patented Wind turbines stall current limit control technology
Patented Wind turbines stall current limit control methods, which makes Wind turbines not run over current, avoid the damage of expensive generator caused by heating due to over current.
 
  1. Wind turbines input MPPT generation technology (boost)
Controller can provide automatically Wind turbines input maximum power tracking mode, or the 5  segments match curve input configuration mode(input rev to input current; or output voltage to input current curve), which makes the high efficient generation of the Wind turbines, but with low speed.
  1. Support multiple output mode selection
This controller provides optional multiple output modes (light control, time control, light on in the morning, PWM dimming, reverse direction), which can satisfy a variety of applications.
 
  1. Statistics the cumulative generating capacity, remaining power, speed, current, temperature and other data
The controller screen displays not only the current, voltage, power of conventional Wind turbines, PV, battery, and the output terminal; but also the cumulative generating capacity of Wind turbines and PV, the remaining battery power, Wind turbines speed, unloading current, and the temperature of controller.
 
  1. Alarm function when terminals up
When the terminals are up, the controller will alarm, which requires customers to use with the correct install direction, avoid the possibility of damage caused by water comes into the controller when used in the open air or due to bad weather.
 
Product Parameter
Model       WWS06-24VDC WWS06-48VDC
Battery parameters
Applied battery voltage 24V 48V
Battery protect method Reverse connection protection (do not burn any components, with voice prompt); over voltage protection, under voltage protection (for street light and such kind of load)
     Voltage at the over voltage protection point 29.0V±0.2V 58.0V±0.3V
Voltage at the over voltage recovery point 27.5V±0.2V 55.0V±0.3V
 Voltage at the under voltage protection point 21.0V±0.2V 42.0V±0.3V
 Voltage at the under voltage  recovery point 23.0V±0.2V 46.0V±0.3V
Battery temperature compensation 5mv/ºC/2V (settable) (optional component)
Wind turbines input parameters
Rated power of applied Wind turbines 600W/24V 600W/48V
Rated power of the terminal 30A dc (after rectification) 15A dc (after rectification)
Max. input current of the terminal 40A dc (after rectification) 20A dc (after rectification)
The default speed of the Wind turbines generation with limited speed 500 Rpm (settable)
The default current of the Wind turbines generation with limited current 30A (settable) 15A (settable)
Wind turbines protection method over rev protection, over current protection, induction lightening protection
Unloading method PWM stepless high-frequency soft unloading (built-in)
MPPT function Boost MPPT model ( automatic tracking or 5 segments curve tracking)
Input current of MPPT channel 12A
PV input parameters
Rated input current of applied PV 550W/24V(standard) 
1100W/24V(Optional)
1100W/48V(standard) 
2000W/48V(Optional)
Rated input current of terminal 15A(standard)         
30A(optional)
Charging voltage drop <0.2V
PV protection methods Reverse connection protection (voice prompt)
Unloading method Open circuit unloading
Discharge the output port parameters
output 2 outputs
Current of each output 12A
Output protection methods Over current protection (15A/30sec.  18A/0.4sec.),  short-circuit protection (current > 150A)
Output control methods  light control, time control, reverse output, PWM output (250HZ, only the 2nd output has it)
Others
Auxiliary function Monitor of air temperature inside controller, temperature of unloading parts and Wind turbines MPPT components, and also the monitor of control terminals installed on the inversion (with voice prompt)
Display mode Liquid crystal (LCD) display
Communication mode RS232(5V electrical level)/RS485 (standard)
  Short-range wireless (optional)
Displayed parameters Wind turbines input voltage/current/power/generated energy/rev/unloading current
PV input voltage/current/power/generated energy
Battery voltage/charging current/power/total charging capacity/battery status information
output current/power/abnormal information of the 2nd output port
Power consumption in standby mode(screen backlight closed) About 20ma /24V system
Operating mode   3M foil key operation (4 keys)
Working temperature / humidity range (environment)    -40~+80ºC/20~85%RH(non condensing)
Protection grade    IP41
Controller size (L*W*H)    175mm*148mm *84mm
  Net weight    1.8KG

Send your message to this supplier

*From:
*To:
avatar Mrs. Wendy
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Gold Member Since 2012

Suppliers with verified business licenses

Manufacturer/Factory
Registered Capital
3500000 RMB
Plant Area
>2000 square meters