Solar Panel 150W with TUV Ce Certificates

• Customization: Available
• Warranty: 10 Years
• Number of Cells: 36pcs
• Model NO.: WW-150S6
• Application: Home Use
• Condition: New
• Certification: EST, ISO, CB, CE
• Material: Polycrystalline Silicon
• Front Cover: 3.2 mm Thick, Tempered
• Frame: Double-Layer Anodized
• Junction Box: IP65 Rated
• Connector: Mc4
• Encapsulate: EVA
• Back Cover: Tpt
• Transport Package: Carton/Wooden
• Specification: 1480*670*35mm
• Trademark: windwing
• Origin: China
• HS Code: 85414020
• Production Capacity: 5000 PCS/Month

Product Description

Product Description

40W 50W 80W 100W 150W 200W 250W 300W Photovoltaic Poly Solar Panel Module with Ce TUV ISO IEC

Brief Introuction
 

Mono Solar Panel

To produce a monocrystalline silicon cells, absolutely pure semiconduction material is necessary. Monocrystalline rods are extracted from melted silicon and then sawed into thin plates.This production process guarantees a relatively high level of efficiency silicon and makes monocrystalline panels one of the most efficient, producing smaller solar cells, and therefore smaller panels. Monocrystalline works very well in bright cool conditions.
Poly Solar Panel
Polycrystalline solar panels are also made from sillicon.However,instead of using a single crystal of silicon,manufacturers melt many fragments of silicon together to form the wafers for the panel.
Polycrystalline solar panels are also referred to as "multi-crystalline"or many-crystal sillicon.
Because there are many crystals in each cell,there is to less freedom for the electrons to move.As a result,polycrystalline solar panels have lower efficiency ratings than monocrystalline panels.

 Applications

On-grid residential roof-tops
On-grid commercial/industrial roof-tops
Solar power plants
Off-grid system
Other on-grid applications


Technical data: 
 

Electrical Parameter Standard Test Conditions (STC)
Type	WW-150s6
Maximum power (Wp)	150wp
Maximum power voltage (V)	18
Maximum power current (A)	8.33
Open circuit voltage (V)	21.9
Short circuit current (A)	8.83
Number of cells (Pcs)	36
Size of module (mm)	1480*670*35mm( 156x156mm cell)
Maximum system voltage (V)	1000
Temperature coefficients of Isc (%)	0.065+/-0.015%/ºC
Temperature coefficients of Voc (%)	-(2.23+/-0.1)mv/ ºC
Temperature coefficients of Pm (%)	-(0.5+-0.05)/ ºC
Temperature coefficients of Im (%)	+0.1/ ºC
Temperature coefficients of Vm (%)	-0.38/ ºC
Temperature Range	-40ºC~+85ºC
Tolerance Wattage (e.g. +/-5%)	+/-3%
Surface Maximum Load Capacity	30m/s(200kg/sq.m)
Allowable Hail Load	steel ball fall down from 1m height
Weight per piece (kg)	11.5
Junction Box Type	Pv0805
Length of Cables (mm)	900
Cell Efficiency (%)	>17.25%
Module Efficiency (%)	>16.4 %
Output tolerance (%)	+/-3%
Frame (Material, Corners, etc.)	Aluminum
Standard Test Conditions	AM1.5  100mW/cm2 / 25'C
Warranty	10years product warranty and 25 years 80% of power
FF (%)	75%
Packing	Plywood Box/Cartonm

Packing and Shipping





Project



Customer Question & Answer

Why Choose Wind Wing SOLAR

1) Excellent quality, competitive price, prompt delivery, on-time service and good reputation.
2) Fast sample delivery
3) Low minimum order
4) Fast shipment in 15~20 days on receipt of your payment.
5) We handle all the components needed for utility-connected systems, or for powering independent homes and remote industrial sites.
6) We offer knowledgeable tech support before and after the sale.
7) We pass the authentication of ISO, RoHS, TUV, and CE approval

FAQ

1. When can I get the quotation?
We usually quote 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

2. How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality counter display.
If you need the samples, we will charge for the sample Express fee. But the cost can be refundable after order confirmation when your quantity of the order is more about the MOQ.

3. Can you do the design for us?
Yes. We have a professional team having rich experience in design and manufacturing. Just tell us your idea and we will help to carry out your ideas. It does not matter if you do not have someone to complete files. Send us high resolution images, your logo and text and tell us how you would like to arrange them. We will send you finished files for confirmation.

4. How long can I expect to get the samples?
After you pay the sample charge and send us confirmation files, the samples will be ready for delivery in 3-7 days. You can use your own express account or prepay us if you do not have an account.

5. What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order. The lead time of MOQ is about 10 to 15 days. Generally speaking, we suggest that you start inquiry two months before the date you would like to get the product at your country.

6. What is your terms of delivery?
We accept EXW, FOB, CIF, etc. You can choose the one which is the most convenient or cost effective for you.

Thank for your visiting